Home > Products > Food Industry >
Precision Molding
Brand Name:Hamsan Tooling
Mold Base:LKM;HASCO;DME,etc
Mold Material:S50C
Tolerance:+/-0.01mm
Shaping Mode:Plastic Injection Mold
Design Software:2D/(PDF/CAD)3D(IGES/STEP)
Packaging Details:Inner plastic bags+Wooden cases
Delivery Time:12-20 days manufacturing lead time
Products Details
WHAT IS RAPID TOOLING?
Rapid Tooling is when Rapid Prototyping techniques and conventional tooling practices are used together to produce a mold quickly. This process is also used to prepare parts of a model from CAD/NX data in less time and at a lower cost compared to traditional manufacturing methods. Rapid Tooling is used as a channel to produce injection molded parts.

APPLICATIONS:
Injection moulding is used for rapid prototyping and for low-high volume manufacturing. It is used for producing parts in the thousands.

ADVANTAGES OF RAPID TOOLING:

HIGH VOLUME MANUFACTURING
More output as compared to other manufacturing processes.

WIDE RANGE OF MATERIALS
Most thermoplastics and some thermosets and silicone can be injection molded.

REDUCE PROCESSES
Complex assembly processes can be consolidated into one process.

REPEATABILITY
The mould can produce a large number of products without wearing out.


MATERIALS USED IN RAPID TOOLING
ABS: ABS is a thermoplastic with high impact resistance, low density, and low cost. It is reinforced with glass fibers. Available in ABS 30% GF and ABS 40% GF.
NYLON GF'S: Nylon is a thermoplastic with great mechanical properties and high chemical and abrasion resistance. It is reinforced with glass fibers. Available in Nylon 30% GF and 40% GF.
PP: Polypropylene is the most common material used in injection moulding and has high chemical resistance. Also available in food grade.
PA6: PA6 is a performance plastic with a high degree of toughness and a good surface finish.
PA12: PA12 is a performance plastic with low moisture absorption, high dimensional strength, and flexibility.
HDPE: High-density polyethylene has a high strength-to-density ratio, impact resistant, and long-lasting.
LDPE: Low-density polyethylene is flexible, had good impact resistance, lightweight with high strength.
POM: Polyoxymethylene has high-temperature resistance, excellent chemical resistance, and good dimensional stability.


PRODUCTION AND EXPORT TOOLING:
We provide high-production tooling for in-house molding or for export.
Single Cavity, multi cavity, family molds,2 shot, Hot Runner Valve gate,
Tooling materials for production molds are typically P20, H13, S7, and NAK80.
Customers can select materials types when quoting
All export molds are sampled and run for several hours to ensure good operation prior to shipping...